Hobbywing HW30105060004 HWQUICRUN-WP-10BL60 - BL ESC

The speedo owns these outstanding features as listed below. External programming port, easy to connect to the Program Card when setting the ESC. Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 9 steps of acceleration (/punch) adjustment from "soft" to "Very aggressive" to fit for different kinds of models, tires and tracks. Multiple protections like Low voltage cut-off protection, Over-heat protection, Throttle signal loss protection and Motor lock-up protection to extend the service life. One-button (the "SET" button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the optional device - the portable Digital LED Program Card, especially convenient for outdoor use.

Current - 60A/360A
Input - 4-9 Cells NiMH, or 2-3S Lipo
BEC Output - 6V/2A (Linear Mode)
Resistance - 0.001
Motor Supported - Sensorless Brushless Motor (compatible with sensored motor but
not in sensored operating mode)
Cooling Fan - Gets working voltage from battery directly without regulating,
The stock fan can work with 2S and 3S Lipo
Weight - 90g

Size - 48.5(L)X38(W)X32(H)mm
Motor Limit - For 2S Lipo or 6 cells NiMH
On-road: 3656-size or smaller motor with the KV<6000
Off-road/Buggy/Monster: 3656-size or smaller
motor with the KV<4000
For 3S Lipo or 9 cells NiMH:
On-road: 3656-size or smaller motor with the
KV<4000
Off-road/Buggy/Monster: 3656-size or smaller
motor with the KV<3000
Car Applicable - 1:10 On-road/Off-road/Buggy/Monster

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Continue