Kyosho Fpv Drone Racer Onboard Monitor W/Batt-Charg Usb K.82724BC

Experience FPV (first person view) control as you fly or drive your existing R/C airplane or car with the KYOSHO ONBOARD MONITOR. This wireless camera and monitor set brings the FPV system made popular on racing drones to hobby model users. The KYOSHO ONBOARD MONITOR operates on 2.4GHz frequency utilizing FHSS that also minimizes image transmission delay, unlike most systems that operate on 5.8GHz, which can require an amateur radio license. The wireless camera incorporates a transmission unit that allows it to be installed on the fuselage (or chassis) and communicate independently with the monitor mounted on the transmitter so you can start enjoying your model's action from first person view. The wireless camera bolts straight on to the Drone Racer and can also be installed on the MINI-Z Racer with the included conversion connector (*1, 2) and on other R/C models with a standard receiver (*3, 4). Experience a totally new vision of land, sea and air model enjoyment with the KYOSHO ONBOARD MONITOR.

1 Cannot be installed on MINI-Z Buggy

2 Rear shocks need to be removed when installing on MINI-Z Racer. Not compatible with all body styles.

3 Requires regulator if connecting to high voltage receiver.

4 Available for LiFe 2 cells(6.6V) as power supply if connecting to general purpose receiver.

Technical Data:

Wireless Camera

-External dimensions L48 x W25.5 x H13.3mm

-Weight 12g approx.

-Resolution 480 x 272 pix

-Frame rate 30fps

-Angle of view 60°

-Frequency 2.4GHz

-Power DC3.6?6.6V

-Current 270mA

-Transmission range 60m (can vary depending on conditions)

Monitor

-External dimensions L125 x W85.7 x H28mm

-Screen Size 4.3 inch TFT (480 x 272)

-Weight 150g (incl. battery)

-Battery 3.7V-1000mAh LiPo (sold separately)

-Video file format AVI

-Video output NTSC

-Media Micro SD card (sold separately)

-Power consumption 260mA

Kit Contents:

-Wireless camera

-Monitor

-Attachment for KT-231P+&KT-531P

-EVA cushion tape (4)

-LiPo battery for monitor

-USB charger

-Conversion connector for receiver

-Conversion connector for MINI-Z

Required For Operation:

Micro SD card

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Continue