1:8 EP Truggy "Torch E" TR8Te 4WD RTR

The Torch E is not a normal 1:8 scale truggy. The Torch E is rather a power pack that is so horrible as cool. You take 2 LiPo batteries and put it into a monster that is waiting for the elixir for life. The Torch E is based on the competition truggy T8TE.

4WD all-wheel drive

Complete ball bearings

17mm aluminium big bore shock absorbers

3 cone differentials

Steel main gear

3mm aluminium chassis plate with side guards

5mm aluminium shock towers

CVD drive shafts at the front axle

Fully adjustable suspension with right-left hand thread

Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch E optimal for each track.

The plastic parts from the Torch E are same as the parts from the T8TE. That means they are just as strong and flexible. That makes your Torch E to a little competition truggy.

The Torch E is not a normal conversion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.

Through the relative far forward sedentary motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.

Mud guards at the rear axle

Fibre-reinforced high-quality plastic parts from the T8TE

Adjustable wheelbase

All-out brushless chassis layout

Aluminium steering rack

Sway bars at the front and rear axle

2 battery boxes right/left arranged for optimum weight distribution

pre-printed body

Length: 590mm

Width: 430mm

Height: 220mm

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Continue