Absima 1:8 Truggy Torch 2.0 6S RTR 13121

Absima 1:8 Truggy Torch 2.0 6S RTR 13121

Get your ABSIMA Torch 6S Truggy and experience a whole new level of quality and performance!

Chassis Concept:

The chassis is fully tuneable with adjustable ride height, tunable shocks, adjustable camber, adjustable toe angle, multiple shock mounting positions and adjustable rear wing.

Durable aluminium parts like the 3mm laser-engraved chassis plate, golden coloured wheel hubs wishbone brackets, brace and damper parts, ensure a long chassis life and a premium design

Drive Concept:

Powered by HOBBYWING, top in its class for performance and reliability and accelerate the vehicle up to 110 km/h. The cooling fan on the 150A speed controller keeps temperatures consistent during full throttle 6S action. The 2100KV motor delivers insane power to the wheels.

Parameters like brake force, drag brake, start mode (punch), running mode and LiPo cut-off are adjustable settings changed through a set button or a programming box available separately) T-plug XT60 connectors provide a reliable connection between your speedo and your choosen battery packs. With so much power being supplied, we advise only using high quality batteries.

5.0mm CVD shafts front and rear, metal spur- and differential gears and 4.5mm centre dogbones are used for power transmission.

"Easy-Use" motor mount concept for a quick and easy motor removal. Just open 2 screws and slide it out!

An optional 15T high-speed pinion is included for use "On-Road" on hard, level surfaces only! (Do not use this gearing for off-road, bashing or continuous start/stop riding, as this may damage the drive units (controller/motor)!)

Our proven ABSIMA "CR2SV2" 2.4 GHz radio system guarantees a fast and reliable connection to your vehicle.

The 15kg metal gear servo with aluminium horn and durable high-performance tires ensure proper steering on any surface.

Features:

Extremly durable composite plastic parts

Monocoque suspension arms

Fully adjustable chassis concept

Hardened steel spur gear and motor pinion

Adjustable oil-filled 16mm Aluminium Big Bore shocks

3 full-metal geared differentials

Downforce wing

Adjustable wing holder

2-piece sliding motor mount concept for easy adjustment and instalation

Massive 5.0mm CVD axles - front & rear

4.5mm middle steel drive shafts - front & rear

Race compound low profile tires

Saddle-Pack battery concept for a perfect weight distribution

3mm black aluminium chassis plate with ABSIMA laser engraving

Aluminium servo arm

Seperate water and dust-proof receiver box

Complete ball bearing mounted

Chassis sideguards for dirt protection

All aluminium parts anodized in gold

Aluminium 17mm wheel hex drives

Steel turnbuckles

Adjustable camber, toe angle & ride height

SPEED UP TO 110 KM/H

Electronics:

ABSIMA "CR2SV2" 2.4GHz A.F.H.D.S. radio system (servo reverse and dual rate function; foam steering wheel)

Water-proof 150A HOBBYWING speed controller (BEC: 6V/4A; programmable features: LiPo cut-off, running mode, brake force, drag brake, punch)

Powerfull 2100KV 4-pole sensorless brushless motor (600W, Shaft : 5mm, Module 1)

15kg / metal gear steering servo (25T outdrive) with aluminium servo arm

Spec:

Scale: 1:8

Drive type: 4WD

Surface: Off-road

Wheelbase: 375mm

Chassis clearance: 45mm

Tire width: 70mm

Tire : 145mm

Steel motor transmission: Pinion: 13T / Spur gear: 49T

Speed pinion 15T included: Yes

Pinion module: 1.0

Length: 555mm

Width: 445mm

Height: 200mm

Weight: 3970g (w/o batteries)

Required for Use:

2x 11.1V LiPo batteries with XT60 plugs.

Suitable LiPo balance charger

LiPo charging safety bag

4x AA batteries for transmitter

Optional program box for easy setup (Item 2110041)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Continue